Mantis Bug Tracker

View Issue Details Jump to Notes ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0000743EMStudioFreeEMS Pluginpublic2012-10-16 15:392012-11-28 17:50
ReporterFred 
Assigned Tomalcom2073 
PrioritynormalSeverityminorReproducibilityalways
StatusassignedResolutionopen 
PlatformAllOSAllOS VersionAll
Product Version0.0.1-SNAPSHOT 
Target Version0.0.1Fixed in Version 
Summary0000743: Intelligent connection handling for SM/FW
DescriptionI believe that this is already under the skin and just needs to be exposed.

Formalising it:

Upon attempt to connect, try SM first, use reset and then open commands, look for 3 or 4 bytes back, if more it's not SM, try firmware, if nothing, it's not a valid port, if lots of bytes and no firmware, it's wrong settings or wrong device, if 3 or 4 and contains valid response, then tell user that they ARE in SM, and that they should flip switch or remove jumper and click retry. Other button should be "go offline" as a way of saying cancel. Retry will send the reset packet first looking for the SM and then fail and fall back to the firmware almost instantly.

Distinctions:

Detect SM = SM
Lots of bytes = FW or random
No bytes = FW or random

SM = "You're in firmware loading mode, please change jumper or switch and click retry"
Lots or No = try FW, if fail report "Wrong device, no device, or wrong port" if success, enter app normally.
Steps To ReproduceCurrently it says SM or wrong port, which is misleading and not helpful.
TagsNo tags attached.
Issue TypeImprovement
Attached Files

- Relationships
related to 0000765resolvedBenFenner Initial message(s) received with no ECU connected need to be better. 

-  Notes
There are no notes attached to this issue.


Copyright © 2000 - 2011 MantisBT Group
Powered by Mantis Bugtracker