0000607: Copying data from 2D or 3D tables to clipboard should paste nicely into spreadsheets.

(0002296)
malcom2073 (manager)
2012-10-11 21:14

3D table copy/paste implemented in 7b61d34c3518819da2b1bdcd1a0ddb190a5d61f2

(0002305)
malcom2073 (manager)
2012-10-14 10:05

2D/3D table copy/paste implemented as of 86be2e3948d860f8e869cdab4ea40bb739670c85

(0002315)
BenFenner (updater)
2012-10-14 14:24

I don't have a configuration file here at home so I'll test at work tomorrow.

(0002334)
BenFenner (updater)
2012-10-15 12:42

1) Pasting from the VE table always results in one extra (empty) column pasting along with the selected data.

2) Pasting one row of data (13 columns long) results in the following error when trying to paste into the row at 120 Kpa or lower: "Attempted to paste a block that does not fit!"

The data trying to be pasted: 79 82 85 89 93 97 99 101 102 102.5 103 103 102.5

3) Pasting the same row of data above into the 5,500 RPM column or higher causes wrap-around of the pasted data, which is not desired behavior. The data should get truncated when it goes off the end of the table.

(0002335)
Fred (administrator)
2012-10-15 13:24

1) I don't see this behaviour, works4me.
2) When I tried to do that it all went white! :-o And half of the axis values disappeared. Error is expected, though. Whiteness is not LOL. Close reopen = "invalid data, check your firmware". OK, it's because the paste goes into the axis... which causes errors etc.
3) I get weird shit when I paste wide data. Can paste it up high, but lower it says it won't fit when it should.

Re truncate/error, I think error should be the default, and truncate without error should be an option, as it's a bulk change and if it doesn't fit, then that's a user error IMO.

(0002336)
Fred (administrator)
2012-10-15 13:48

Screeny of whiteness attached.

(0002337)
Fred (administrator)
2012-10-15 14:02

Was wrong screeny, reattached.

(0002408)
BenFenner (updater)
2012-11-20 16:01

Latest on the forum says this is complete. Should I test and we can close this?

(0002424)
malcom2073 (manager)
2012-11-22 03:44

Fixed in ddad10f4d7d22f2d2f6525a07fe02de4aebf2b47

I think both 2D and 3D tables operate the same, and work. Let me know if you have any issues, or any bugs come up.

(0002432)
BenFenner (updater)
2012-11-27 15:28

The verbiage and syntax for one of the error messages isn't great but the feature behavior is complete as far as my testing shows so I'm closing this.

Notes
(0002296) malcom2073 (manager) 2012-10-11 21:14	3D table copy/paste implemented in 7b61d34c3518819da2b1bdcd1a0ddb190a5d61f2

(0002305) malcom2073 (manager) 2012-10-14 10:05	2D/3D table copy/paste implemented as of 86be2e3948d860f8e869cdab4ea40bb739670c85

(0002315) BenFenner (updater) 2012-10-14 14:24	I don't have a configuration file here at home so I'll test at work tomorrow.

(0002334) BenFenner (updater) 2012-10-15 12:42	1) Pasting from the VE table always results in one extra (empty) column pasting along with the selected data. 2) Pasting one row of data (13 columns long) results in the following error when trying to paste into the row at 120 Kpa or lower: "Attempted to paste a block that does not fit!" The data trying to be pasted: 79 82 85 89 93 97 99 101 102 102.5 103 103 102.5 3) Pasting the same row of data above into the 5,500 RPM column or higher causes wrap-around of the pasted data, which is not desired behavior. The data should get truncated when it goes off the end of the table.

(0002335) Fred (administrator) 2012-10-15 13:24	1) I don't see this behaviour, works4me. 2) When I tried to do that it all went white! :-o And half of the axis values disappeared. Error is expected, though. Whiteness is not LOL. Close reopen = "invalid data, check your firmware". OK, it's because the paste goes into the axis... which causes errors etc. 3) I get weird shit when I paste wide data. Can paste it up high, but lower it says it won't fit when it should. Re truncate/error, I think error should be the default, and truncate without error should be an option, as it's a bulk change and if it doesn't fit, then that's a user error IMO.

(0002336) Fred (administrator) 2012-10-15 13:48	Screeny of whiteness attached.

(0002337) Fred (administrator) 2012-10-15 14:02	Was wrong screeny, reattached.

(0002408) BenFenner (updater) 2012-11-20 16:01	Latest on the forum says this is complete. Should I test and we can close this?

(0002424) malcom2073 (manager) 2012-11-22 03:44	Fixed in ddad10f4d7d22f2d2f6525a07fe02de4aebf2b47 I think both 2D and 3D tables operate the same, and work. Let me know if you have any issues, or any bugs come up.

(0002432) BenFenner (updater) 2012-11-27 15:28	The verbiage and syntax for one of the error messages isn't great but the feature behavior is complete as far as my testing shows so I'm closing this.

Relationships