0000527: Loader Fails To Remember File And Directory After Clicking OK

(0001214)
pjohns30 (reporter)
2012-02-21 16:40

It usually loses the file directory if the loader is open, and I rebuild the firmware using a "clean" command. Like it's checking to see if that file is still there every time it's going through a loop.

(0001215)
Fred (administrator)
2012-02-21 16:41

<@CheetahToo> it should write it to the file once when you hit OK
<@CheetahToo> and it should read it once when it opens the ****ing dialog

(0001216)
pjohns30 (reporter)
2012-02-21 18:28

Ignore my previous statement. I was thinking/talking about the MTX loader.

(0001217)
Fred (administrator)
2012-02-21 18:34

From IRC:

[19:18] <@CheetahToo> PJ__: i dont see the behaviour that you see
[19:18] <@CheetahToo> for me if the dialog is closed then it behaves
[19:18] <@CheetahToo> and if the dialog is open then you have to go up a dir and back down

(0001218)
pjohns30 (reporter)
2012-02-21 18:36

I think this is what Fred wanted me to do.

[11:06] <@CheetahToo> for me if the dialog is closed then it behaves
[11:06] <@CheetahToo> and if the dialog is open then you have to go up a dir and back down
<snip>
[11:13] <@CheetahToo> ahh, copy paste my messages and post on the issue please

(0001598)
Fred (administrator)
2012-06-22 19:49

Upgrading to high priority, this is fucking annoying and disconcerting. Display md5 of file and name of file in text area would help me relax :-p

(0001919)
sean94z (reporter)
2012-08-27 19:47

Sorry for the delay, please verify :)

commit 8555156f5fe7f2f7293e90aa62c89592c4f785c4
Author: Sean Keys <skeys@ipdatasys.com>
Date: Mon Aug 27 12:46:48 2012 -0700

Load and Rip directories are saved as soon as you click OK

(0001922)
sean94z (reporter)
2012-08-27 20:42

Please verify :)

(0001935)
Fred (administrator)
2012-08-27 21:57

Tested good.

Notes
(0001214) pjohns30 (reporter) 2012-02-21 16:40	It usually loses the file directory if the loader is open, and I rebuild the firmware using a "clean" command. Like it's checking to see if that file is still there every time it's going through a loop.

(0001215) Fred (administrator) 2012-02-21 16:41	<@CheetahToo> it should write it to the file once when you hit OK <@CheetahToo> and it should read it once when it opens the ****ing dialog

(0001216) pjohns30 (reporter) 2012-02-21 18:28	Ignore my previous statement. I was thinking/talking about the MTX loader.

(0001217) Fred (administrator) 2012-02-21 18:34	From IRC: [19:18] <@CheetahToo> PJ__: i dont see the behaviour that you see [19:18] <@CheetahToo> for me if the dialog is closed then it behaves [19:18] <@CheetahToo> and if the dialog is open then you have to go up a dir and back down

(0001218) pjohns30 (reporter) 2012-02-21 18:36	I think this is what Fred wanted me to do. [11:06] <@CheetahToo> for me if the dialog is closed then it behaves [11:06] <@CheetahToo> and if the dialog is open then you have to go up a dir and back down <snip> [11:13] <@CheetahToo> ahh, copy paste my messages and post on the issue please

(0001598) Fred (administrator) 2012-06-22 19:49	Upgrading to high priority, this is fucking annoying and disconcerting. Display md5 of file and name of file in text area would help me relax :-p

(0001919) sean94z (reporter) 2012-08-27 19:47	Sorry for the delay, please verify :) commit 8555156f5fe7f2f7293e90aa62c89592c4f785c4 Author: Sean Keys <skeys@ipdatasys.com> Date: Mon Aug 27 12:46:48 2012 -0700 Load and Rip directories are saved as soon as you click OK

(0001922) sean94z (reporter) 2012-08-27 20:42	Please verify :)

(0001935) Fred (administrator) 2012-08-27 21:57	Tested good.

Relationships