Mantis Bug Tracker

View Issue Details Jump to Notes ] Print ]
IDProjectCategoryView StatusDate SubmittedLast Update
0000526FirmwareInit & Configpublic2012-02-15 18:162013-05-01 10:35
ReporterFred 
Assigned ToToxicGumbo 
PrioritynormalSeverityminorReproducibilityN/A
StatusclosedResolutionfixed 
PlatformOSOS Version
Product Version0.2.0-SNAPSHOT 
Target Version0.2.0Fixed in Version0.2.0 
Summary0000526: Move most hardware setup configuration from init.c to fixedconfig* .h/.c
DescriptionThings like input/output gpio configuration and serial setup etc etc should all live in adjustable flash config so it can be tuned without a recompile. This is the second major thing that needs to move out of code. After this is done there will be very little left hard coded.
TagsNo tags attached.
FirmwareVersion
Issue TypeImprovement
Risk of Breakagelow
Attached Files

- Relationships
child of 0000180closedFred Move ALL inline config to flash config 

-  Notes
User avatar (0001793)
Fred (administrator)
2012-08-01 00:49

Fixed in 8ea13fd131df52c7ca8216a9e0fca52feac1d721. Please review changes to ensure key pins are in suitable states. Testing is possible with a DMM too.
User avatar (0001794)
Fred (administrator)
2012-08-01 00:53

There are a few things that could still be added to config, but nothing important:

Number of ADCs sampled.
Number of ECT pins in use.
Port H interrupt config (and other normal ISRs)

Those are exempt :-p
User avatar (0002637)
Fred (administrator)
2013-05-01 10:35

No action from Jeff on this in 9 months, closing.


Copyright © 2000 - 2011 MantisBT Group
Powered by Mantis Bugtracker