FreeEMS Issues - Jaguar PCB
View Issue Details
IDProjectCategoryView StatusDate SubmittedLast Update
0000888Jaguar PCBSchematicpublic2014-03-06 05:062014-03-07 09:50
ReporterDeuceEFI 
Assigned ToFred 
PrioritynormalSeverityminorReproducibilityN/A
StatusresolvedResolutionfixed 
PlatformOSOS Version
Product Version0.6-alpha 
Target Version0.7-alphaFixed in Version0.7-alpha 
Summary0000888: Ignitor outputs need SMD resistors and LEDs for indicators
DescriptionThe ignitor outputs need SMD resistors and LEDs for troubleshooting indicators under the IC on the through hole side of the PCB. This should be similar to the injector driver LED indicators so that the developer/user can see if the ignitor outputs are working.
Steps To ReproduceN/A
Additional InformationNo indicators exist on the 0.6-alpha board which prompted this request for the feature to be added.
TagsNo tags attached.
Relationships
Attached Files

Notes
(0002757)
Fred   
2014-03-06 05:09   
Just as a note on this, The outputs should come from the OUTSIDE of the current limit resistors such that it's possible to see what's actually happening, as opposed to what the driver is doing (potentially into a dead short, for eg).
(0002759)
DeuceEFI   
2014-03-07 02:16   
Added the SMD resistors and LEDs as of Git commit 3d9bff071764e20c33f8b9a499878d13785fc233
(0002760)
Fred   
2014-03-07 09:50   
Andy, in future, if you push the changes required, set it resolved ("change status to" and check "resolved") and assign to me or someone else willing to review :-) We can close them once checked.