FreeEMS Issues - Firmware
View Issue Details
0000526FirmwareInit & Configpublic2012-02-15 18:162013-05-01 10:35
Fred 
ToxicGumbo 
normalminorN/A
closedfixed 
0.2.0-SNAPSHOT 
0.2.00.2.0 
Improvement
low
0000526: Move most hardware setup configuration from init.c to fixedconfig* .h/.c
Things like input/output gpio configuration and serial setup etc etc should all live in adjustable flash config so it can be tuned without a recompile. This is the second major thing that needs to move out of code. After this is done there will be very little left hard coded.
No tags attached.
child of 0000180closed Fred Move ALL inline config to flash config 

Notes
(0001793)
Fred   
2012-08-01 00:49   
Fixed in 8ea13fd131df52c7ca8216a9e0fca52feac1d721. Please review changes to ensure key pins are in suitable states. Testing is possible with a DMM too.
(0001794)
Fred   
2012-08-01 00:53   
There are a few things that could still be added to config, but nothing important:

Number of ADCs sampled.
Number of ECT pins in use.
Port H interrupt config (and other normal ISRs)

Those are exempt :-p
(0002637)
Fred   
2013-05-01 10:35   
No action from Jeff on this in 9 months, closing.